flange

常见例句

• Both flange and web exhibited satisfactory elongation characteristics ( i . e . 28 % ).
  翼缘和腹板都有令人满意的延伸率 ( 即28% ).
• Three structures have exhibited cracking at the ends of flange gusset plates.
  已有三个结构在翼缘节点板端部出现了裂纹.
• Small rectangular backup bars were used to fabricate the web - bottom flange connection.
  在腹板与下翼缘的施焊中使用小矩形挡板.
• These include gusset plates welded to the flange.
  这些包括焊接到翼缘上的节点板.
• For flange size backflow preventers installed vertically ( flow down ), a fabricated air gap is recommended.
  对于 垂直安装 的法兰通径防回流阀, 则建议采用预制气隙.
• It's ideal equipment for bend angle iron flange.
  是制作角铁法兰、型材滚圆弯曲的理想设备.
• Please give clear indication of flange, material and operating pressure if you need other standard.
  当需要其他标准法兰 、 材质或操作压力时请在订货时注明.
• Flange hole inside the tube must be chamfered hole welding.
  法兰内孔管件内孔必须倒角焊接.
• Retighten all flange bolts in a star pattern in order to extrude rubber sleeve flange material.
  为了将橡胶套管法兰挤出来,需要按照星形模式重新紧固所有法兰螺栓.
• Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
  上紧叶片弹簧加压机直到衬套凸缘的底部扎实地扺住叶片弹簧的孔眼.
• Engages in the production of die mould material, large forging, and chrome steel flange.
  公司从一九九六年建立以来,从各大钢厂吸取技术, 引进各大型锻打设备及炼钢技术.
• The open end of the pipe or equipment is sealed with a blind flange.
  管道或设备的敞开端用盲法兰封堵.
• Flange gaskets are not interchangeable with other mechanical pipe couplings or flange gaskets.
  法兰垫圈与其它机械管道连接器或法兰垫圈互换.
• Produced products with all kinds of mold, screw, Shaft, flange and various mechanical parts.
  公司生产产品有各类模具 、 丝杠 、 轴类 、 法兰及各种机械部件.
• A great variety of flange are applied to industry such as machinery, petrochemical industry etc.
  法兰类件种类繁多,广泛地应用于机械、石油 、 化工等行业,产量较大,是关键性部件.
• Insulating joint which is different from insulating flange achieve connection through welding ( appendix A ) .
  与绝缘法兰不同的是,绝缘接头的 左法兰 和勾圈是通过焊接实现连接的.
• Mating flange ID must match sleeve ID.
  配套法兰内径必须与套管内径匹配.
• Flange joint system, the location of high stress level geometry discontinuity.
  法兰接头系统中应力水平较高的位置在几何形状不连续处.
• The wind power flange is the important part in electric by wind.
  风力发电塔筒法兰是发展风力发电的重要零部件.
• Seat Face: Negates need for flange gaskets.
  阀座表面: 不需要使用阀兰垫圈.
• Different flange form, requires the use of gaskets are also different.
  不锈钢法兰形式不同, 要求使用的垫片也不同.
• Agitator mounting flange can be fixed on the vessel flange with the corresponding bolt.
  凸缘爬升的鼓吹者能用相应的螺栓被固定在舰船凸缘上.
• Uses the thread or the flange capillary vessel joint.
  采用螺纹或法兰毛细管联接.
• Our main steel gate valve , globe valve , check valve steel flange , pipeline strainer and so on.
  各种材质闸阀、截止阀 、 止回阀 、 球阀 、 法兰及过滤器等.
• Electric air heaters emersion heaters , heater tubes after burners, flange heaters.
  电子空气加热器,复现加热器, 燃烧,加热管, 滚边加热器.
• SKM STIEGELMEIER GMBH deals in Ball bearings , Swivel rollers as well as with Wheel flange wheels.
  请您访问我们的主页,垂询当前的信息和服务.
• Replacement sleeves are made with one flange end slightly softer than the other.
  用来更换的套管其一端的法兰比另一端稍微柔软一些.
• It excels in heat resistance and sealing ability and is easy to adjust to flange.
  由于其具有优良的耐热性,密封性,所以易帖附在排气管连接槽处.
• Remove the bottom flange cover.
  拆卸底部法兰盖.
• Every lens has a mounting flange with which it is attached to the camera body.
  每个透镜都有一个安装凸缘,依靠它才能把透镜安装到相机上.
• Remove the all of urethane from all pinchweld flanges.
  由夹紧焊接凸缘去除所有尿烷.
• The gripper tube and the annular flange are used to clamp the saw blade.
  所述的卡管和夹紧套筒的环形凸缘作用来夹紧锯片.
• Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
  上紧叶片弹簧加压机直到衬套凸缘的底部扎实地扺住叶片弹簧的孔眼.
• Closure flanges may be mechanically seamed or welded in place.
  封闭装置凸缘可用机械方法或焊接方法洽当接合.
• Force the seal onto door flangContinue rearward until it is seated on flange.
  用力将密封压到车门凸缘上,继续向后压直至它固定到凸缘上.
• There is only one flat area profile on its flanges and it's on one side only.
  在它的法兰凸缘上只有一个平面区域,且只有一边.
• Firmly press downward to seat seal on flange.
  稳固地向下压将座椅密封压入凸缘中.
• Lode parameters are used to analyze the stress and the strain of the flange in calendering.
  应用罗代参数对压延工艺中的凸缘部分进行应力和应变分析.
• Note: R is the distance between the flange fitting surface and the shaft shoulder.
  注: R为凸缘配合面至轴伸肩的距离.
• Agitator mounting flange can be fixed on the vessel flange with the corresponding bolt.
  凸缘爬升的鼓吹者能用相应的螺栓被固定在舰船凸缘上.
• There are two flat area profile on both flanges.
  两个法兰凸缘都有平面区域.
• R indicates the distance from fitting face of flange to axle shoulder.
  为凸缘配合面至轴伸肩的距离.
• Position weatherstrip on flange aligning notches in each corner.
  将防水饰条安放在与每个角落刻痕对齐的凸缘上.
• Insert the cord into the window opening flange channel in the weatherstrip seal.
  把绳索插入到防水饰条密封件处的窗户开口凸缘沟槽.
• Adjust windshield glass position until it is aligned with the flanges and adhesive.
  调整挡风玻璃位置直至与凸缘和粘结剂对准.
• Slowly pull seal away from flange around edge of glass openinRemove it from vehicle.
  沿着玻璃开口边的凸缘,慢慢地拉去封条.将其车辆上拆去.
• Inspect and repair the windshield opening and pinchweld flanges.
  检查并修理挡风玻璃开口与夹紧焊接凸缘.
• Remove cover and clean flange and reseal.
  拆卸车轴护罩,清洁凸缘并重新密封.
返回 flange